MASONRY HANDSAWS

PINK LABEL Brick'n'Block Handsaw - DT198Offering the widest range of masonry handsaws, there is no doubt that you will find the one that matches your needs.

In many situations the use of a handsaw can be the better choice, for example with a small job it might even be faster then using a machine or in areas where there is no access to electricity.

We use two different tooth designs for our handsaws, our special developed self-sharpening design as well as the traditional design where the tooth is in an upright position.

BLACK LABEL - Brick'n'Block Handsaws

BLACK LABEL Brick'n'Block Handsaw - DT200

This masonry handsaw have a coarse tooth pitch, but at the front there is a section with a fine tooth pitch for an easy start. It is designed for cutting in plaster blocks and autoclaved aerated concrete.

We have of course used tungsten carbide teeth to have optimum lifetime and then we have used the self-sharpening tooth design that we invented.

The handle is made of wood.

DT200 - 400MM WITH 18MM TOOTH PITCH - 15" WITH 1-1/5TPI
DT201 - 500MM WITH 18MM TOOTH PITCH - 19" WITH 1-1/5TPI
DT202 - 600MM WITH 18MM TOOTH PITCH - 24" WITH 1-1/5TPI

PINK LABEL - Brick'n'Block Handsaws

PINK LABEL Brick'n'Block Handsaw - DT196

The best all-round masonry handsaw with tungsten carbide teeth, and with this tooth pitch the handsaw is ideal for sawing in bricks, hollow blocks and lime stone but will also work well in soft materials such as plaster blocks and autoclaved aerated concrete.

The self-sharpening tooth design offers a good cutting speed and in combination with the tungsten carbide teeth it has an overall good lifetime.

The handle is made of wood.

DT196 - 400MM WITH 12MM TOOTH PITCH - 15" WITH 2½TPI
DT197 - 500MM WITH 12MM TOOTH PITCH - 19" WITH 2½TPI
DT198 - 610MM WITH 12MM TOOTH PITCH - 24" WITH 2½TPI

GRAY LABEL - Brick'n'Block Handsaws

GRAY LABEL Brick'n'Block Handsaw

A fine tooth pitched brick'n'block handsaw that will cut well in bricks, lime stone, hollow blocks and even in some foundation block.

With the fine tooth pitch vibrations are brought to a minimum this is of course also helped with the use of our self-sharpening tooth design

The handle is made of wood.

DT188 - 400MM WITH 6MM TOOTH PITCH - 15" WITH 5TPI
DT189 - 500MM WITH 6MM TOOTH PITCH - 19" WITH 5TPI
DT190 - 610MM WITH 6MM TOOTH PITCH - 24" WITH 5TPI

WHITE LABEL - Masonry Handsaws

WHITE LABEL Masonry Handsaw - DT261

This is the traditional masonry handsaw design they do very well in soft materials such as plaster blocks, autoclaved aerated concrete and Leca blocks.

The tooth design is old style with an upright position but in combination with the very coarse tooth pitch it is a fast cutting handsaw in soft stone materials.

The handle is a SoftGrip plastic handle.

DT260 - 700MM WITH 38MM TOOTH PITCH - 28" WITH ⅔TPI
DT261 - 700MM WITH 19MM TOOTH PITCH - 28" WITH 1⅓TPI